long exposure photography important tips

 Tips for Long Exposure Photography

Long exposure photography has become very popular in the last couple of years, getting a lot of coverage in landscape photography magazines and on photo sharing websites.

On to the Long Exposure Photography Tips…

Tip 1: Whilst a tripod is considered a baseline requirement for many landscape photographers, it is even more important when shooting with a 10-stop filter. Exposures can easily extend to greater than a couple of minutes, so it is vital that your tripod is as sturdy as can be. This typically means ensuring that the legs are stood on firm ground, the centre column is not extended and the strap is secured so not to catch the wind.

You will often read that people recommend hanging your camera bag from the tripod to add ballast weight, however I think that it can often act as a large sail and cause greater instability if windy, so I instead tend to place a beanbag (full of uncooked rice) on top of the camera to add extra weight, without significant additional surface area.

Tip 2: Given that the filter is incredibly dense, unless the conditions are really bright, there will not be enough light getting through to allow the autofocus to function. Therefore, it is best to compose and focus your shot without the filter, switch to manual focus and then carefully attach the filter. This way the lens will not hunt for focus when you press the shutter.

Tip 3: It is important to close the viewfinder shutter, or at least cover the viewfinder, to ensure accurate light metering (if shooting in an automatic exposure mode, such as aperture priority) and to prevent stray light from sneaking in during the exposure. I’m not sure how critical the second point is but given how much the auto-metering is affected by the open viewfinder, I no longer take the chance so ensure it is closed before taking my shot.

Tip 4: For exposures in excess of 60 seconds, you’ll need to be able to locate the ‘BULB’ mode of your camera. Switching to BULB enables you to open the shutter for as long as you choose, enabling really long exposures, meaning:

• You will most likely need a remote shutter release cable so that you can lock the shutter open for a given period of time (it’s a good idea to attach the remote release to the tripod using Velcro during the exposure, again to stop it from catching the wind and swinging around).
• You will most likely need a way of calculating how long to leave the shutter open for. In some cases, the maths is trivial (for example, if an exposure without the filter is ¼ s, when using a 10-stop filter it becomes 0.25 s x ~1000 = 250 s, 250 s / 60 = ~4 minutes) but in others it can be more difficult, and as the light conditions can change pretty quickly, a phone app (such as NDCalc for android/iOS) can come in very handy.
• Tip 5: Choose the right conditions. Ideal conditions for long exposure photography are when there is dappled cloud and a strong wind (see Tip 1). If there are no clouds, or no wind, there will be nothing to add movement. I prefer to shoot around sunrise/sunset, as then the sun is low in the sky, increasing the contrast in the clouds, resulting in an exaggerated streaking effect in the final image.